Porvene Doors
As a leader within the industrial and commercial door industry, the Company will always manufacture a superior product with innovative designs and techniques to meet our customers needs.
{tab Series 200}
STANDARD ITEMS
- Greaseless Nylon Bearings: This exclusive feature delivers longer life than metal bearings, without costly maintenance.
- Drum Assembly: The counter balancing mechanism is housed in this unique, roll-up assembly.
- Lock Seam: The sections are lock seamed together. If one section is damaged beyond repaired, it can be easily replaced.
- Weather Seal: A blade astragal made from E.P.D.M., a highly resilient and flexible rubber compound, runs the full length of the bottom angle to seal the threshold of the opening. This forms a barrier against weather, dirt, insects and rodents.
- Guides: Roll formed single piece guide standard on all doors.
- Chain Operation: Smooth hand-chain provides safe and comfortable operation eliminating the sharp edges common to lock link hand chain.
- Locking Assembly: Exclusive tamper-proof slide bolt lock accommodates two padlocks for double protection.
- Galvanized Steel Curtain: A continuous sheet of . galvanized steel delivers maximum security.
OPTIONS
- VISION LITES
- VENT CUT OUTS
- SCREENED VENTS
- WICKET DOORS
- ELECTRIC OPERATORS
- ELECTRIC SENSING EDGE
- ELECTRIC INTERLOCKS
- WEATHERSEAL
- STEEL BUILDING PLATES
{tab Series 300}
STANDARD ITEMS
- Sealed Ball Bearings: Self-aligning and allow lasting free rotation.
- Drum Assembly: The counter balancing mechanism is housed in this unique, roll-up assembly.
- Maximum Security: All slats are manufactured from the highest quality galvanized steel with a baked enamel finish, to form an effective secure curtain. Two slide bolt locks standard on all doors. (Available in 24 or 22 gauge.)
- Weather Seal: A blade astragal made from E.P.D.M., a highly resilient and flexible rubber compound, runs the full length of the bottom angle to seal the threshold of the opening. This forms a barrier against weather, dirt, insects and rodents.
- Guides: Two pieces roll formed steel guides standard on all standard doors. Windlocks provided on larger sizes.
- Chain Operation: A minimum of a 4 to 1 reduction standard on all roll-up doors. Smooth hand-chain provides safe and comfortable operation eliminating the sharp edges common to lock link hand chain.
- Slat Configuration: All doors available in curved or flat slats. Galvanized according to ASTM A653-G60 and finished with baked epoxy primer and baked polyester topcoat.
- The Porvene Secret: State of the Art technology has allowed Porvene Doors to create a Door Dynamometer which accurately measures the torque characteristics of roll-up doors.
OPTIONS
- VISION LITES
- CUT OUT VENTS
- VENT SCREENS
- PASS DOOR
- WICKET DOOR
- ELECTRIC OPERATORS
- SAFETY SENSING EDGES
- ELECTRIC INTERLOCK SWITCH
- PERIMETER WEATHERSEAL
- POWDER COATING: OVER 150 COLORS AVAILABLE
{tab Series 400}
STANDARD ITEMS
-
Steel Slat Curtain: All slats are manufactured from the highest quality galvanized steel with a baked enamel prime finish. Available in 24 ga., 22 ga., 20 ga., or 18 ga.,. Available in Flat or Curved. (18 ga. in Curved only).
- Drum Assembly. The counter balancing mechanism is housed in this unique, roll-up assembly
- Guides: Minimum 3/16" structural steel angle. (Roll formed guides on 24 gauge doors up to 14'0" x 14'0".
- Bottom Bar: Two 2" x 2" x 1/8" thick structural steel angles form a rugged bottom bar assembly. A rubber bottom astragal helps to conform to floor irregularities and helps guard against weather, dirt, insects and rodents.
- Pipe Barrel: Continuous 6" minimum diameter pipe to support curtain with no more than .03" of deflection per foot of width.
- Counterbalance: Helical torsion springs are oil tempered and grease packed. Springing is accurately calculated for every door using Porvene's uniquely designed "Door Dynamometer".
- Door Stops: Stops are located on the inside and outside of the guides for added safety.
- Sealed Ball Bearings: Self-aligning and allow free rotation of barrell
- Chain Hoist: Heavy duty #50 roller chain and sprockets combined with a smooth hand-chain provides for safe and efficient operation. Removal of chain hoist makes door Electric Operation ready without further modification or cost.
OPTIONAL ITEMS
- VISION LITES
- VENTS
- SCREENED VENTS
- PASS DOORS
- WICKET DOORS
- ELECTRIC OPERATORS
- ELECTRIC SENSING EDGE
- ELECTRIC INTERLOCKS
- WEATHERSEAL
- POWDER COATING-OVER 150 COLORS AVAILABLE
{tab Series 500}
STANDARD ITEMS
- Grille Curtain. Clear anodized aluminum tubes over steel rods for added strength and security.
- Guides: Clear anodized extruded aluminum with polyethylene wear strips for smooth operation
- Bottom Bar. Clear anodized aluminum with low friction nylon blocks mounted at ends for smooth and quiet operation.
- Locking. Slide bolt locks standard on all Grilles.
- Counterbalance. Helical torsion springs calculated for optimal ease of operation.
- Push up Operation. Available up to 100 square feet
OPTIONS
- HOODS
- CHAIN REDUCTION DRIVE
- SECURITY PATTERN
- AWNING CRANK
- FACIA PANELS
- ELECTRIC OPERATORS
- ELECTRIC SENSING EDGE
- ELECTRIC INTERLOCKS
- STRUCTURAL STEEL TUBES
- BOTTOM BAR MOUNTED DROPPED CEILING SEAL
{tab Series 600}
{/tabs}
